Difference between revisions of "DATA COLLECTION"

Revision as of 09:02, 22 June 2016

I. Collect Data

Key Layout:

       Alphanumeric keypad is set to numeric mode by default. The [FN/ALPHA]
 as a toggle among in numeric, alpha (lower-case alphabetic), ALPHA (upper-case
 alphabetic) input modes.

     Note: It is not necessary to hold down the FN/Alpha key.

       The associated icon will appear on the lower-right corner of the screen in a          sequence as shown below.
        Screen Icon              FN/ALPHA KEY                      Input Mode
          (none)                       N/A                          Numbers
             A             Press[FN/ALPHA] one time             Upper-case alphabetic
             a             Press[FN/ALPHA] two times            Lower-case alphabetic
             F             Press[FN/ALPHA] three times          Function mode

Process:
 1. After clicking the Power On button the device selection menu will
    display.

 2. Click Enter/OK button.

 3. Input the Store Name then click Enter/OK button.

 4. Next input the Sell/Stock area

 5. After inputting the Sell/Stock area click Enter/OK button.

 6. Then input the name of the Checker press Enter/OK button again.

 7. Press the Scan button to get the barcode of the item.

 8. Next input the number of quantity.

 9. Then click Enter/OK button.

 10. To scan another items repeat the steps from STEP 6 – STEP 8.

     Note: If you want to change the Store Name, Sell/Stock area and Checker click
 the Back/Cancel button once for you to return in STEP 3.

II. Upload Data

    Note: Before you start the steps in uploading data, be sure that your device was          properlyconnected to your Computer same as the figure shown below'.

  Process:

 1. Open Remote Console application installed in your computer.

    Note: If Remote Console window did not display after clicking the
 application. See the Toolbars then look for the icon of Remote Console
 
 Point the mouse in the icon.
 Next right click.
 Then select/choose Maximise.

 2. Click System menu placed on the upper part of the Remote Console
   window.

 3. Next Click the Link Properties.

 4. In the Link Property Window, click the dropdown button inline with
   label/word Interface.

 5. Next choose/select Cradle IR.

 6. Then beside Port input 9, to assign which data collector the user wants to
    access/connect.
  System Menu

 7. After assign the data collector, go back on the device (data collector)
  choose the Upload menu, by just simply clicking the drop down button
  then press Enter/OK button (after turning on the device). Wait until the
  device is totally connected.

 8. Next go back to the System (Remote Console) click the Play/Start button
  placed on the left side upper part of the window. Wait until the Data
  Collector device will display a message that states “Sending Transf.:
  done”.

 9. Then data collector will ask which data user wants to delete, just choose
   one and then press Enter/OK button.

 10. A confirmation message will display then just choose if Yes/No and click
   Enter/OK button.

 11. Then click the Stop button placed beside the Play/Start button in
   Remote Console window.

 12. To view the uploaded file, go back to the Remote Console window.
 
 13. On the left side of the window click Files and the uploaded files will

display.

III. File Format

 1. In the Remote Console window click System menu.

 2. Next select File Properties.

 3. File naming rules will display.
   System Menu

 4. In rule number 6, beside File Name Format label input the
   number of rule you want to include in saving/uploading the
   file/data in the textbox provided.

 5. The series of the inputted rule numbers are the basis which rule
  number will comes first in uploading/saving the file.

 6. User can set the path where the file should be uploaded by
  simply clicking browse in the File Path layer.

 7. Next select the location and click OK.

 8. User can also set the extension name of the file by simply
   inputting the extension name in the textbox placed beside the
   label Data Filename Extension.

 9. Then click OK button.

== Reference ==
  DATA COLLECTOR USER’S MANUAL Document