Difference between revisions of "POS USER'S MANUAL"

Latest revision as of 15:36, 5 January 2018

* POS INSTALLATION *

* Step 1: Install Maria DB on your PC.

Figure 1. Installing the MariaDB installer.

On figure 1 you will see the installer for iPosWare. Click the installer named mariadb-10.0.21-win32 and run it.

Figure 2. MariaDB 10.0 Setup

On figure 2 will show a confirmation that you want to install the setup. Click Next.

Figure 3. End-User License Agreement

On figure 3, you will see all the terms in the License Agreement. Click I accept the terms in the License Agreement and click Next.

Figure 4. Custom Setup

On figure 4, you will select or change the way features will be installed. In our case, just click Next.

Figure 5. User settings

On figure 5, you will modify password for database user ‘root’. On the new root password and confirm field, type limsehleng then click Next.

Figure 6. Database settings

Figure 6 shows the Instance properties of your database. No need to modify any field just click Next.

Figure 7. Submit usage information

Figure 7 will give you a choice if you want to participate in giving feedback that will be used to improve MariaDB. Click Next.

Figure 8. Ready to install MariaDB

Figure 8 will give you a chance if you want to go back to previous step. If there is nothing to configure, click Install.

Figure 9. Ready to install MariaDB

The figure 9 will show the progress of installation. Wait until finished, then click Next.

Figure 10. Installation completed

Figure 10 is the last step in installing MariaDB. It shows the installation is done, just click Finish.

*Step 2: Install SQLyog

Figure 11. Choose Install Location

On figure 11, you will choose the destination folder of the SQLyog. Place it on drive C: and click Install.

Figure 12. Choose Components

You will ask what components you want to install on your computer. Select all and click Next.

Figure 13. License Agreement

On figure 13, you will see all the terms in the License Agreement. Click I accept the terms in the License Agreement and click Next.

Figure 14. SQLyog Setup Wizard

Figure 14 is the welcome page on the setup wizard. Click Next to continue.

Figure 15. Installer Language

You will ask to select what language to use on installation. Select English and click OK.

Figure 16. Installing SQLyog

Wait until the installation is finished and click Next.

Figure 17. Install completed

Figure 17 shows that the installation is done. Click Finish.

Figure 18. Creating a new connection

On figure 18, you need to create a new database connection. To create, click New.

Figure 19. Naming the connection

Figure 19 will ask for the name of connection. Just leave as it is and click OK.

Figure 20. Filling out the password

On this step, you need to fill out the field for password with limsehleng. After filling out the password field, click Connect.

Figure 21. Create your database

Once you are connected, you can now create your database. Right click [1] shown on figure 21.

Figure 22. Create your database (2)

Click Create Database shown on figure 22.

Figure 23. Naming your database

It is important to name your database correctly so that you may not encounter any errors during the system execution. For the database name field, name it as db_iposdata.

Figure 24. Database successfully created

When the database was successfully created, you will see your database at the left part of the screen. See figure 24 for the actual image.

Figure 25. Execute SQL Script

For the database to have all the needed tables at values, you must execute SQL script. To do this, just right click your database and go to import and click Execute SQL Script.

Figure 26. Locating your SQL File

You will be asked to locate where your sql file is located. This may vary on where you place your sql file. In my case, I place it on the desktop. After locating, just click Execute.

Figure 27. Executing query

After locating your SQL file, wait until the queries are executed. It may take few minutes based on your computer performance.

Figure 28. Adding user (1)

The next thing you should do is to add user. To do this, just click the user icon shown on figure 28.

Figure 29. Adding users (2)

Click Add New User shown on figure 29.

Figure 30. Filling out the needed information

Fill out the fields with this following information:

Figure 31. Selecting Privileges

Click Select/Deselect All to configure and click Save Changes.

Figure 32. Adding another user

Click Add User again to add another user.

Figure 33. Filling out the needed information

Fill out the fields with this following information:

Figure 34. Selecting Privileges for another user

Click Select/Deselect All to configure and click Save Changes and close the window.

* Step 3: Copy the required files on drive C:

Figure 35. Open the C Folder

There are files that need to be copy on you drive C:, to get them you must open the C Folder.

Figure 36. Copy all files

Copy all files inside the C Folder.

Figure 37. Paste files on your Drive C:

Paste all files that you copied on C Folder on drive C:

* Step 4: Installing the EPSON Printer

Figure 38. Run the EPSON setup

Run the EPSON setup to start installing.

Figure 39. Preparing the setup

Figure 39 shows that EPSON is preparing setup.

Figure 40. Welcome page

After preparing the setup, EPSON will show a welcome page. Click Next.

Figure 41. Selecting the setup type

Choosing for the type of setup is mostly shown when we are installing a software. For our case, just click Standard.

Figure 42. Printer Configuration

On this part, we need to plug in the printer in the Computer so that the software can recognize which printer we are using. Also, on setting up the software, it is a must.

Figure 43. Add printer

On this part, we will ask to select driver and what type of port to be use. For the driver, we will be using EPSON TM-U220 Receipt and for the Port Type, select Create a USB port.

300px

Figure 44. Printer Configuration

After adding a printer, the computer already recognized what printer we will be using. Click Next.

Figure 45. Copying files

The summary of the configuration we made during set up is shown on figure 45. Click Next to continue.

Figure 46. Setup Status

Wait until the installation is done.

Figure 43: Installation complete

The printer is now ready! Lastly, we need to install iPosWare.

* Install the iPosWare

Figure 44: Run the setup

Run the setup application file to start the installation.

Figure 45: Install the set up

Click Install to start the installation of iPosWare.

Figure 46: iPosWare installing

Wait until the installation is done. It may take few minutes based on your computer performance. When it is done, you can run the application and use it.

Difference between revisions of "POS USER'S MANUAL"

Latest revision as of 15:36, 5 January 2018

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 35: / Line 35: @@
 ''On figure 4, you will select or change the way features will be installed. In our case, just click Next.''
-  [[File:5.JPG|center|400px]]
+  [[File:5.JPG|center|300px]]
 <center>'''Figure 5. User settings'''</center>
 ''On figure 5, you will modify password for database user ‘root’. On the new root password and confirm field, type limsehleng then click Next.''
-  [[File:6.JPG|center|400px]]
+  [[File:6.JPG|center|300px]]
 <center>'''Figure 6. Database settings'''</center>
 ''Figure 6 shows the Instance properties of your database. No need to modify any field just click Next.''
-  [[File:7.JPG|center|400px]]
+  [[File:7.JPG|center|300px]]
 <center>'''Figure 7. Submit usage information'''</center>
 ''Figure 7 will give you a choice if you want to participate in giving feedback that will be used to improve MariaDB. Click Next.''
-  [[File:8.JPG|center|400px]]
+  [[File:8.JPG|center|300px]]
 <center>'''Figure 8. Ready to install MariaDB'''</center>
 ''Figure 8 will give you a chance if you want to go back to previous step. If there is nothing to configure, click Install.''
-  [[File:9.JPG|center|400px]]
+  [[File:9.JPG|center|300px]]
 <center>'''Figure 9. Ready to install MariaDB'''</center>
 ''The figure 9 will show the progress of installation. Wait until finished, then click Next.''
-  [[File:10.JPG|center|400px]]
+  [[File:10.JPG|center|300px]]
 <center>'''Figure 10. Installation completed'''</center>
@@ Line 69: / Line 69: @@
   '''*'''Step 2: Install SQLyog
-  [[File:11.JPG|center|400px]]
+  [[File:11.JPG|center|300px]]
 <center>'''Figure 11. Choose Install Location'''</center>
 ''On figure 11, you will choose the destination folder of the SQLyog. Place it on drive C: and click Install.''
-  [[File:12.JPG|center|400px]]
+  [[File:12.JPG|center|300px]]
 <center>'''Figure 12. Choose Components'''</center>
 ''You will ask what components you want to install on your computer. Select all and click Next. ''
-  [[File:13.JPG|center|400px]]
+  [[File:13.JPG|center|300px]]
 <center>'''Figure 13. License Agreement'''</center>
 ''On figure 13, you will see all the terms in the License Agreement. Click I accept the terms in the License Agreement and click Next.''
-  [[File:14.JPG|center|400px]]
+  [[File:14.JPG|center|300px]]
 <center>'''Figure 14. SQLyog Setup Wizard'''</center>
 ''Figure 14 is the welcome page on the setup wizard. Click Next to continue.''
-  [[File:15.JPG|center|400px]]
+  [[File:15.JPG|center|200px]]
 <center>'''Figure 15. Installer Language'''</center>
 ''You will ask to select what language to use on installation. Select English and click OK.''
-  [[File:16.JPG|center|400px]]
+  [[File:16.JPG|center|300px]]
 <center>'''Figure 16. Installing SQLyog'''</center>
 ''Wait until the installation is finished and click Next.''
-  [[File:17.JPG|center|400px]]
+  [[File:17.JPG|center|300px]]
 <center>'''Figure 17. Install completed'''</center>
@@ Line 109: / Line 109: @@
 ''On figure 18, you need to create a new database connection. To create, click New.''
-  [[File:19.JPG|center|400px]]
+  [[File:19.JPG|center|300px]]
 <center>'''Figure 19. Naming the connection'''</center>
 ''Figure 19 will ask for the name of connection. Just leave as it is and click OK.''
-  [[File:20.JPG|center|400px]]
+  [[File:20.JPG|center|600px]]
 <center>'''Figure 20. Filling out the password'''</center>
 ''On this step, you need to fill out the field for password with limsehleng. After filling out the password field, click Connect.''
-  [[File:21.JPG|center|400px]]
+  [[File:21.JPG|center|500px]]
 <center>'''Figure 21. Create your database'''</center>
@@ Line 129: / Line 129: @@
 ''Click Create Database shown on figure 22.''
-  [[File:23.JPG|center|400px]]
+  [[File:23.JPG|center|200px]]
 <center>'''Figure 23. Naming your database'''</center>
@@ Line 144: / Line 144: @@
 ''For the database to have all the needed tables at values, you must execute SQL script. To do this, just right click your database and go to import and click Execute SQL Script.''
-  [[File:26.JPG|center|400px]]
+  [[File:26.JPG|center|300px]]
 <center>'''Figure 26. Locating your SQL File'''</center>
 ''You will be asked to locate where your sql file is located. This may vary on where you place your sql file. In my case, I place it on the desktop. After locating, just click Execute.''
-  [[File:27.JPG|center|400px]]
+  [[File:27.JPG|center|300px]]
 <center>'''Figure 27. Executing query'''</center>
 ''After locating your SQL file, wait until the queries are executed. It may take few minutes based on your computer performance.''
-  [[File:28.JPG|center|400px]]
+  [[File:28.JPG|center|500px]]
 <center>'''Figure 28. Adding user (1)'''</center>
 ''The next thing you should do is to add user. To do this, just click the user icon shown on figure 28.''
-  [[File:29.JPG|center|400px]]
+  [[File:29.JPG|center|500px]]
 <center>'''Figure 29. Adding users (2)'''</center>
 ''Click Add New User shown on figure 29.''
-  [[File:31.JPG|center|400px]]
+  [[File:31.JPG|center|300px]]
 <center>'''Figure 30. Filling out the needed information'''</center>
 ''Fill out the fields with this following information:''
-  [[File:32.JPG|center|400px]]
+  [[File:32.JPG|center|300px]]
-  [[File:33.JPG|center|400px]]
+  [[File:33.JPG|center|300px]]
 <center>'''Figure 31. Selecting Privileges'''</center>
 ''Click Select/Deselect All to configure and click Save Changes.''
-  [[File:34.JPG|center|400px]]
+  [[File:34.JPG|center|600px]]
 <center>'''Figure 32. Adding another user'''</center>
 ''Click Add User again to add another user.''
-  [[File:35.JPG|center|400px]]
+  [[File:35.JPG|center|300px]]
 <center>'''Figure 33. Filling out the needed information'''</center>
 ''Fill out the fields with this following information:''
-  [[File:36.JPG|center|400px]]
+  [[File:36.JPG|center|300px]]
-  [[File:37.JPG|center|400px]]
+  [[File:37.JPG|center|300px]]
 <center>'''Figure 34. Selecting Privileges for another user'''</center>
@@ Line 210: / Line 210: @@
 '''*''' Step 4: Installing the EPSON Printer
-  [[File:41.JPG|center|400px]]
+  [[File:41.JPG|center|200px]]
 <center>'''Figure 38. Run the EPSON setup'''</center>
 ''Run the EPSON setup to start installing.''
-  [[File:42.JPG|center|400px]]
+  [[File:42.JPG|center|300px]]
 <center>'''Figure 39. Preparing the setup'''</center>
 ''Figure 39 shows that EPSON is preparing setup.''
-  [[File:43.JPG|center|400px]]
+  [[File:43.JPG|center|300px]]
 <center>'''Figure 40. Welcome page'''</center>
 ''After preparing the setup, EPSON will show a welcome page. Click Next.''
-  [[File:44.JPG|center|400px]]
+  [[File:pos44.JPG|center|300px]]
 <center>'''Figure 41. Selecting the setup type'''</center>
 ''Choosing for the type of setup is mostly shown when we are installing a software. For our case, just click Standard.''
-  [[File:45.JPG|center|400px]]
+  [[File:45.JPG|center|300px]]
 <center>'''Figure 42. Printer Configuration'''</center>
@@ Line 236: / Line 236: @@
-  [[File:46.JPG|center|400px]]
+  [[File:46.JPG|center|600px]]
 <center>'''Figure 43. Add printer'''</center>
 ''On this part, we will ask to select driver and what type of port to be use. For the driver, we will be using EPSON TM-U220 Receipt and for the Port Type, select Create a USB port.''
-  [[File:pos47.JPG|center|400px]]
+  [[File:Pos47.JPG|center|300px]]
 <center>'''Figure 44. Printer Configuration'''</center>
 ''After adding a printer, the computer already recognized what printer we will be using. Click Next.''
-  [[File:48.JPG|center|400px]]
+  [[File:48.JPG|center|300px]]
 <center>'''Figure 45. Copying files'''</center>
 ''The summary of the configuration we made during set up is shown on figure 45. Click Next to continue.''
-  [[File:49.JPG|center|400px]]
+  [[File:49.JPG|center|300px]]
 <center>'''Figure 46. Setup Status'''</center>
 ''Wait until the installation is done. ''
-  [[File:50.JPG|center|400px]]
+  [[File:50.JPG|center|300px]]
 <center>'''Figure 43: Installation complete'''</center>
@@ Line 263: / Line 263: @@
 '''*''' Install the iPosWare
-  [[File:51.JPG|center|400px]]
+  [[File:51.JPG|center|300px]]
 <center>'''Figure 44: Run the setup'''</center>
@@ Line 269: / Line 269: @@
-  [[File:52.JPG|center|400px]]
+  [[File:52.JPG|center|300px]]
 <center>'''Figure 45: Install the set up'''</center>
 ''Click Install to start the installation of iPosWare.''
-  [[File:53.JPG|center|400px]]
+  [[File:53.JPG|center|200px]]
 <center>'''Figure 46: iPosWare installing'''</center>
 ''Wait until the installation is done. It may take few minutes based on your computer performance. When it is done, you can run the application and use it.''