View source for INSTALLATION OF DATA COLLECTOR SOFTWARE ver. 1.01

[[Main_Page | Main Page]] > [[Application_Development_Team | Application Development Team]] > [[System_Manual | System Manual]] > [[DATA_COLLECTOR |DATA COLLECTOR]]

''' Procedure for Loading in 8001 PDT '''

 
 '''Loading of BASIC Runtime to PDT'''

 PDT Side

 1. Connect PDT Terminal to PC 
 2. Turn Off PDT device
 3. Press 7 and 9 simultaneously while pressing power on.  The terminal should go to System    
    Menu.
 4. At System Menu, Select Load Program, or press 6 and Enter.
 5. Select Load C program.
 5. Select Cradle-IR
 6. Select 115200 Baud Rate

 At PC Side

 8. Run ProgLoad.exe
 9. Select Cradle-IR
 10. Select Correct Comport Number
 11. Select Baudrate: 	115200
 12. Select File Type (.SHX)
 13. Select Bb8000V418.shx 
 14. Click OK. Downloading Process should start.
 15. Wait until the program is completely loaded to the PDT

 '''Loading of BASIC program to PDT'''

 1. Connect PDT Terminal to PC 
 2. Turn Off PDT
 3. Press 7 and 9 simultaneously while pressing power on.  The terminal should go to System    
    Menu
 4. At System Menu, Select Load Program, or press 6 and Enter
 5. Select Load Basic
 6. Select Cradle-IR
 7. Select 115200

 At PC Side

 7. Run Progload.exe
 8. Select Cradle-IR
 9. Select Correct Comport Number
 10. Select Baudrate: 	115200
 11. Select File Type (.SYN)
 12. Select Sterling-100.syn
 13. Click OK. Downloading Process should start.
 14. Wait until the program is completely loaded to the PDT

[[Main_Page | Main Page]] > [[Application_Development_Team | Application Development Team]] > [[System_Manual | System Manual]] > [[DATA_COLLECTOR |DATA COLLECTOR]]