View source for Biometrics Manual

== '''Creation of User/(For Admin Users)''' ==

# Press menu "M/OK" button.
# Next GO to User Management ,then click "New User"
# After clicking "New User" click "Finger Print"
# Select the finger to  be enrolled.
  NOTE:0,1,2,3,4, for the left hand 5,6,7,8,9 for the right hand will be used!
# Enrolled your finger print "three times(3x)"
# After your enrolled your let finger, create backup.
# Click again "Finger Print" for the backup
# Done!!
  NOTE:If you want to check if the user has already created.
# Go to user management ----->
# All user's checked the finger print.


== '''Backup User Data on USB & Transfering User Data''' ==

# Insert the USB on the biometrics/finger print
# Press menu "M/ok"button.
# Log in your finger print id.
# Go to USB manager,Then Download, User Data
# then press ESC to exit
# After downloading the data in USB drive, put the USB on the other biometrics
# Go to USB manager, then Upload,then Uer Data
# Check if the data is successful download
# Go to user management, click all user to checked the user's is already uploaded.

== '''Downloading Attendance Data to USB''' ==

# Insert the USB
# Press menu "M/ok"button.
# Log in you finger print id
# Go to USB manager
# click download, then click the '''ATTENDANCE DATA'''
# Select by time rench,wait until the downloading is done
# then press ok

== '''Backup Data Management or Copying all Data in Biometrics (Admin Role)''' ==

# Insert the USB
# Press menu "M/ok"button
# Log in you finger print id
# Go to data management
# Backup to device
# Backup Start
# Wait until backup is ompleted
# Then press ECS exit

== '''Deleting Attenance Data''' ==

# Insert the USB
# Press menu "M/ok"button
# Log in you finger print id
# Go to data management
# click delete data
# select category you want to delete
# then press ok

== '''Restoring Data''' ==

# Insert the USB
  NOTE:Make sure that you have correct data you have
# Press menu "M/ok"button
# Log in you finger print id
# Go to data management
# Restore data
# Restore from device
# Start restore
# Then click Yes
# Wait until backup is ompleted
# Device Auto boot
# Then click ok

== '''User Data File''' ==

# user.dat 
# template.fp10
# template.fp10.1

== '''Attendance Data'''==

# 0348141000339_aatlog.dat

== [[Setting Data & Time]] ==

# Press M(menu)/OK button
# Log in your finger print id
# Go to system
# Then date time
# Correct the corresponding date & time 
# Then press the button ESC if you done